Jalson International Inc.
  • Home
  • Services
    • Managed Services
    • Consulting and Professional Services
  • Contact
  • Blog

Configuring Standard Local Route Group (SLRG) on CUCM

3/14/2017

0 Comments

 
a.   Create a Gateway (MGCP/H323) or SIP Trunk (SIP Gateway)   
b.   Create Route Group (RG), add the above created Gateway/SIP Trunk
c.   Create Route List (RL) --> Select "Standard Local Route Group" for Route Group 
c.   Create Route Pattern (RP) - for example 911 --> Select the RL (as created in step c)
d.   Device Pool --> Select Local Route Group (as created in step b)
0 Comments



Leave a Reply.

    Author

    Saad is a Senior Consultant for Jalson International. He is CCIE x 3 (Collaboration, R&S and Data Center)
    ​

    Picture

    Categories

    All
    Cisco
    Collaboration
    IOS
    Microsoft
    Virtualization

    Archives

    June 2020
    July 2018
    April 2018
    March 2018
    January 2018
    April 2017
    March 2017
    February 2017

    RSS Feed

©2020 Jalson International, Inc.
All RIghts Reserved
  • Home
  • Services
    • Managed Services
    • Consulting and Professional Services
  • Contact
  • Blog