1. Infrastructure
Make sure basic infrastructure is there: For example: VLAN, DHCP, NTP, etc 2. Basic CME Config telephony-service max-ephones 10 max-dn 30 ip source-address 10.1.1.1 ! voice vlan/loopback address create cnf-files Power on phones in sequence. To verify, sh ephone 3. Configuring Phone Numbers ephone-dn 1 number 1001 ephone-dn 2 number 1002 ephone 1 mac-address <MAC> button 1:1 ! Button 1, DN 1 (configured above) restart ephone 2 mac-address <MAC> button 1:2 ! ! Button 1, DN 2 (configured above) restart 4. Changing Display Message on Phone telephony-service system message Jalson International Inc 5. Dual Channel ephone-dn 3 dual-line number 1003 ephone 1 button 1:1 2:3 restart To verify: sh ephone 6. Seconadry Dial Tone telephony-service secondary-dialtone 9 7. Call Blocking telephony-service after-hours block pattern 1 91900 7-24 after-hours block pattern 2 9011 after-hours ??? ephone 2 after-hour exepmt Ephone 2 will be able to dial 91900 (Premium) and 9011 (International) 8. Call Distribution -- shared lines ephone-dn 7 number 1077 ephone 1 button 2:7 ephone 2 button 2:7 9. Timezone telephony-service time-zone 43 ! type ? aftertimezone to see the list. 10. Date Format telephony-service date-format dd-mm-yy 11. Call Transfer/Call Forward Allow to Any Pattern telephony-service call-forward pattern .T ! to forward to any pattern transfer-pattern .T ! to transfer to any pattern including PSTN transfer-system full consult ! full-consult - won't allow blind transfer
1 Comment
Chris Tavern
2/11/2017 03:01:53 pm
Nice and simple write up. Thanks.
Reply
Leave a Reply. |
AuthorSaad is a Senior Collaboration Engineer. He is CCIE x 3 (Collaboration, R&S and Data Center) Categories
All
Archives
May 2022
|